T3 3.00" 4 Bolt Turbine Housing - GT3071R, GT3076R, GT3082R

Replacement Garrett Turbine / Exhaust Housing, T3 undivided with 3" GT 4 Bolt outlet.

Your pick of .63, .82, 1.06 A/R (pick from menu)
For Garrett GT3071R, GT3076R (aka GT30R) & GT3082R turbos

This is the exhaust/turbine housing only. It's a T3 (T31) inlet (exhaust manifold side) with 3" GT 4 Bolt exit. (downpipe side). Direct bolt on & replaces/upgrades your existing housing.

Installing & replacing your turbine housing is very simple. Once the turbo is removed from the car, the new housing is installed by simply removing the (6) 1/2" mounting bolts holding the turbine housing to the center cartridge. The old housing then slips right off & the new housing goes back on in the reverse order. Some applications do not require that the whole turbo even be removed from the car depending on available space & leverage. This is a 1 out of 10 in difficulty.

Turbine housings are often changed or replaced for various reasons such as:
- To allow the turbo to be used with a new application, exhaust manifold or downpipe.
- To obtain a more desirable A/R size for your application.