V-Band Adapter Flange T3 5 Bolt To 3" V-Band (Ford Style)

HR Turbo To Downpipe Converter discharge/exist adapter. Converts standard T3 5_bolt (aka Ford style) exhaust/turbine housing downpipe discharge to a 3.00" V-band exit. The outer 5 holes are used to bolt the flange to the back of the exhaust housing & a 3.00" V-band flanged downpipe will bolt/clamp directly to it. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined and rainbow TIG welded.

V-band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Design: T3 5 Bolt To V-band Adapter 3.00"
- Adapter Side #1: T3 5-Bolt w/ 2.50" I.D. (transitions to 3.00")
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon & stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Always confirm your bolt spacing to unsure this is the correct item for your application. Fits many turbos with T3 5_bolt turbine housings, including:
T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.