V-Band Downpipe Adapter Flange: 2.5" T3 3 Bolt To 3" V-Band

HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 2.50" 3_Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined & rainbow TIG welded. Note: This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.

V-Band side is available in two face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Adapter Side #1: T3 3 Bolt w/ 2.50" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: About 74mm from the center of one hole to the center of the other.
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.50"
- Material Type: Mild Carbon & Stainless Steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Fits Many Turbos with 2.5" 3 Bolt/5 Bolt hole turbine housings with internal wastegates, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.