V-Band Downpipe Adapter Flange: 3" T3 GT 4 Bolt To 3" V-Band

HR Turbo To Downpipe Converter/Downpipe discharge adapter. Converts a T3 turbine housing from a 3.00" GT 4 Bolt to a 3" V-Band, or vise-a-verse. Makes connecting a downpipe to a turbocharger simple & straight forward. Direct bolt on, no welding required. Machined 1 piece (mild carbon steel) or Rainbow TIG welded (stainless steel) design. This adapter fits also the T3 internal wastegate swing valves that we offer, along with other applications.

V-band side is available in two Face sizes. Each are for use with 3.00" OD tubes. Select from menu.
#1: 3.75" (3 3/4" / 95mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Standard/ Most Common size)
#2: 3.625" (3 5/8" / 92mm) Outer Diameter, Flat Face/Seal Side, For 3" tube/pipe (Slightly Smaller than above)

- Brand: HIMN'I Racing
- Adapter Side #1: GT 3.00 4 Bolt Bolt w/ 3.00" opening.
- Adapter Side #2: 3.00" V-Band with 3" I.D. & choice of 3 3/4" or 3 5/8" O.D. face side.
- Bolt Spacing: See Image
- Bolt Hole size: For use with standard 8mm and 10mm bolts/studs or SAE equivalent
- Overall Thickness/Height: 1.25"
- Material Type: Mild Carbon Steel or Stainless steel
- Finish: Excellent, Raw, Smooth surface for proper sealing
- Manufactured Tolerances: 0.001
- Made In: United States (USA)
- Includes HR Exclusive 1 Year Warranty. Covers materials and craftsmanship to be free of any defects. Guaranteed to never crack, warp or otherwise fail.

Always confirm your bolt spacing to unsure this is the correct item for your application. Fits Many Turbos with 3.00" GT 4 Bolt turbine housing downpipe discharge, Including: T3, T31, T3/T4, T3/T4E, T3/T04E, T3/60-1, T3/T04S, GT2560R, GT28, GT28R, GT28RS, GT2860RS, GT2871R, GT2876R, GTX2860R, GTX2863R, GTX2867R, GT3071, GT3071R, GTX3071R, GT30, GT30R, GT3076R, GTX3076R, GT3040, GT3040R, GT3082R, GTX3576R, GT35, GT35R, GT3582R, GTX35, GTX35R, GTX3582R, GT3788R, GT-K325, GT-K350, GT-K500, GT-K550, GT-K650, Billet GT-K600, Billet GT-K700

Don't be fooled into a cheap, low quietly anything. Even something as simple as a flange or adapter are not all created equal. Side effects of a low quality flange are incorrect fitment, sloppy fit, doesn't fit, leaking, wrapping, stripping, cracking, rusting SS, barbs, rough textured finish, "plastic-ish" metal, difficult to weld, cracking welds, etc. Use an HR flange to insure the very highest of quality.