Categories
- Turbochargers
- Turbo Flanges / Adapters
- Turbo Gaskets
- Accessories
- Blow Off / Bypass Valves
- Boost Controllers
- Clamps
- Exhaust
- Fittings & Lines
- Fuel Supply
- Intercooler Pipes & Parts
- Intercoolers
- Pipes / Bends / Elbows /Tubes
- Turbo Accessories -Other
- Turbo Silicone Couplers
- WasteGates
- MAZDA
- MITSUBISHI
- SUBARU
- VW / Audi
- CLEARANCE ITEMS
Reviews [more]
Newsletter
EnglishClampco
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
Garrett 40mm External Wastegate Kit GVW-40 SILVER
Garrett 40mm GVW-40 External Wastegate ...
$317.00
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
New Products For April
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
Himni SS Master Engine Nut & Bolt Kit, 87-91 Mazda RX-7
Master engine hardware kit. Replaces mo...
$78.00
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
2A Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 86-92
Himni Racing Polyurethane FC RX-7 Motor...
$98.00
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
HR GT Turbo Water / Oil Installation Kit : GT25R - GT35R
For use with All small to mid frame Gar...
$78.00
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
86-91 Mazda FC RX-7 SS Braided Oil Cooler Line/Hose Kit
Made in USA. The Himni Racing FC RX7 St...
$215.00
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
Himni Polyurethane Motor Mounts -STREET/RACE Mazda RX-7 93-00
Himni Racing Polyurethane FD RX-7 Motor...
$99.90
5.50" T-Bolt Clamp - Stainless Steel
Made in The USA. High quality Clampco 5.50" Stainless Steel T-Bolt clamp w/lock nut. Used to connect intercooler couplers to intercooler pipes/tubes, exhaust slip joints, etc. Superior to standard "screw" clamps, does not cut & mar silicone couplers, increased clamping force withstands high pressure applications, applies full 360 degree pressure for a secure fit.
::Note:: When choosing a T-bolt clamp for use with silicone I/C coupler connections, always go up at least one size above the outer diameter of the intercooler tube, to compensate for the thickness of silicone connector. (i.e. 3.00" OD pipe with coupler installed, use a 3.25" or 3.50" Clamp)Some couplers are thinker than others depending on coupler ply/layers. When in doubt, always go up TWO sizes to be safe.
$5.90
Himni SS Master Engine Nut & Bolt Kit, 93-99 Mazda RX-7
Master engine hardware kit. Replaces mo...
$84.00
Featured Products
Himni Racing Polyurethane FC RX-7 Motor...
Himni Racing Polyurethane FD RX-7 Motor...
Bestsellers
Customer Testimonials
very fast shipping for international!!!! thank you & i will be back for more soon.
-Michael E. Rattelsdorf, Germany...
Read More ->
Already in my hands!
Oh my goodness! Fastest shipping I have ever experienced from the US! Many thanks
- James S. Ontario, Canada...
Read More ->
LATEST PRODUCTS
Garrett 40mm GVW-40 External Wastegate K...
-
Garrett 40mm GVW-40 External Wastegate K...
EXTRAS
SUPPORTS
© Copyright 2005-2023 Himni Racing. All Rights Reserved.